Waveform Technical Specifications
Waveform is an authorized Bryston dealer.

Sub Cabinet
Bass - Midrange - Treble
Head Module
Additional Information

Subwoofers 2-12" treated paper cone
Cabinet Material 3/4" MDF board
Damping Material Fiberglass damping material used internally
Terminals Three pairs of heavy gold on solid brass terminals for tri-amplification - all active
Finish Standard - Architectural-grade steamed American black walnut veneer
Optional - quilted Makoré or pommele Mahogany
Miscellaneous Rubber-insulated nylon furniture glides
Black oxide line inlay on vacuum formed, radiused, mitred edges
Five internal braces
Integral black nylon rope tote handle for ease of movement. Handle disappears under transition moulding
Grille Cage Standard - Black upper and lower grille cage
Optional - Grey
Dimensions 23 1/2" sq x 16 3/4" sq x 25" tall
Enclosed Volume 4.79 cu ft (134 L)
Weight 88 lbs (107 lbs crated) - System Weight Per Channel 125 lbs (148 lbs crated)

Frequency Response (on axis) 27 Hz - 17 kHz ± 1 dB, measured anechoically at the NRC, Canada (20 Hz - 20 kHz ± 3 dB room)
Low Bass Equalization 14 dB at 22 Hz
Sensitivity 91.5 dB 1W/1M anechoic (up to 94 dB room)
Crossover Frequency Bass to Mid 325 Hz
Mid to Tweeter 1850 Hz
Linkwitz-Riley Slope 24 dB/Oct
Impedance 4 ohms min bass, 8 ohms mid and treble
Recommended Amp Power 125W (400W max) woofer, 50W (120W max) mid and tweeter

Tweeter Custom faceplated 1" silk dome
Midrange Super high efficiency, super linear, cast aluminum basket with flat surround, vented pole piece/phase plug, cone is vacuum formed plastic TPX
Head Material 16 layer MDF laminate turning
Connection 4 pin gold plated Neutrik XLR connection to bass cabinet, stainless steel shielded
Finish Silver pearl glaze over black mini-textured acid cured paint
Miscellaneous Tilt and turn CRT based mountable egg head, 45 degrees left and right, 13 degrees up and down
Transition Moulding 2 1/2" acoustic foam rubber mounted on 3/4" MDF base located and isolated from spurious bass vibrations by 4-3/4" rubber dowels of 50 durometer rating and further isolated by a sheet of 1/16" neoprene rubber of 20 durometer rating. The purpose here is to eliminate comb filtering from the top of the bass cabinet.
Black double-knit polyester covering
Grille Cage 1/8" x 1/4" flat bar steel (removable for best sound, although best measurable grille available)
Dimensions 12" x 14 1/2" (Overall Head Module is 16 3/4" sq x 17" high)
Weight 37 lbs (41 lbs crated)

Warranty & Guarantee Thirty day money back guarantee on loudspeaker systems
Ten year limited warranty. Twenty year warranty on electronics
Ordering Information U.S. Retail Mfg. List Price - $14,500
CDN Retail Mfg. List Price - $19,500
Factory Direct Price - $6,995 U.S. and $9,595 CDN from Waveform

All international sales payable in Canadian funds
Freight is extra

E-Mail Waveform jotvos@waveform.ca